Dead Pixel Test

Choose a color, then click the preview to open it fullscreen. Look for dots that stay dark, bright or a different color.

Choose a color

Selected: White

In fullscreen: ← / → or Space changes color · Enter shows controls · Esc exits.

Opening test… · 1 / 9 · White

Controls hide after 4 seconds when idle. Tap or click to show them. Colors change manually.

What does a dead pixel test do?

This tool fills the screen with a uniform color so you can look for small dots that differ from their surroundings. It does not read your panel, count defects automatically or certify that a display is fault-free. Colors change only when you choose; there is no flashing repair mode.

How to check for dead pixels

  1. Move the browser window to the display you want to inspect. Use the display’s recommended native resolution, a comfortable brightness and a normal viewing position. Remove surface dust following the manufacturer’s cleaning instructions.

  2. Choose a color, then click the preview or Open fullscreen. If fullscreen is unavailable, the test covers only the browser area; browser bars and the rest of the display are not checked.

  3. Start with white for dark dots, black for bright dots, then red, green and blue for spots that differ from the surrounding color. Gray, yellow, cyan and magenta provide extra backgrounds for comparing the same spot.

  4. Use the on-screen Previous and Next buttons. With the test surface focused, arrow keys or Space switch colors. Hide the controls to inspect the area underneath; tap or click the surface, or press Enter, to reveal them.

  5. Press Escape or choose Exit test. If a spot persists, verify with your monitor’s built-in diagnostic if available and consult the manufacturer’s pixel policy.

Which color should I use for a pixel test?

White screen pixel test

Use white to look for dark dots. Compare a suspected spot on other colors and check for surface dust before treating it as a panel defect.

Check pixels on white

Black screen pixel test

Use black to look for dots that stay bright or colored. Check the same spot on white and RGB backgrounds to see how it behaves.

Check bright pixels on black

Red, green and blue screen checks

Switch through RGB backgrounds and look for small areas that differ from the surrounding color. This is a visual pixel check, not a measurement of color accuracy.

Start with red, then check green and blue

Gray screen test

Use the mid-gray background to compare a suspected spot with its surroundings without a bright white field. This single gray pattern is an extra visual check, not a full uniformity assessment or an OLED burn-in diagnosis.

Compare pixels on gray

Yellow, cyan and magenta checks

These mixed-color backgrounds add another way to compare a spot after checking RGB. Use yellow, then cyan and magenta if needed; they do not measure color accuracy or repair pixels.

Try the yellow background

Pixel test questions